Marshall Roofers
Clay roof tiles stacked in rows on new battens, part way through being laid

Tiled Roofing

Tiled Roofing in Berkshire, Surrey and West London

Plain tile, interlocking concrete and natural slate roofs laid, repaired and re-bedded.

Get a price for tiled roofing

Send your details and a short description of the job.

7am to 7pm, seven days

14 towns covered

Emergency call-outs

Priced in writing

The work

The details that stop being visible

Tiled roofing covers clay plain tile, concrete interlocking and natural slate, laid new or repaired. Getting it right is mostly about the details that stop being visible once the roof is finished: the batten gauge, the head lap, how many tiles are mechanically fixed rather than relying on the nib, and how the ridge and hips are secured.

Modern dry ridge and dry verge systems hold far better than everything bedded in mortar, because mortar cracks and lets go while a mechanically fixed ridge does not. Done properly the roof shrugs off wind uplift and driving rain and needs far less attention over its life.

On repairs and extensions we match the existing tile so the new work does not stand out, and we re-bed, re-point or convert to dry systems depending on what the roof actually needs. You get a written price and a tidy site at the end of it.

A finished tiled roof with a terracotta dry ridge and dry verge on a brick semi

What you get

What is included

  • 1

    Lay the tiles or slate

    Clay plain tile, concrete interlocking and natural slate laid

  • 2

    Battens set correctly

    Battens set to the correct gauge and head lap for the covering

  • 3

    Fixed for wind uplift

    Mechanical fixing to current wind uplift practice

  • 4

    Dry ridge and verge

    Dry ridge and dry verge systems fitted, or mortar work re-bedded

  • 5

    Lead or system valleys

    Valleys formed in lead or with a proprietary valley system

  • 6

    Tile matching

    Tile matching on repairs and extensions

The process

How tiled roofing normally runs

  1. 01

    Identify the covering

    What is on the roof now, what is still available, and what the closest match is.

  2. 02

    Specify

    Gauge, lap, fixing pattern and ridge detail set out in the quote, not decided on the roof.

  3. 03

    Prepare

    Membrane and battens go on first, set out so the courses land correctly at the ridge.

  4. 04

    Lay and finish

    Tiles laid and fixed, then the ridge, hips and verges finished and the site cleared.

Pricing

What moves the price

Every roof is different, so the quote follows a look at yours rather than a figure over the phone. The roof, and the loft where the fault is a leak, both get checked before anything is priced.

The quote you get back is itemised: access, materials, labour and clearing the site. Where the job needs scaffold, that goes in the figure from the start, not added later. The points on the right are what make the biggest difference to where the price lands.

What we look at

  • Whether the covering is plain tile, interlocking or natural slate
  • The pitch, and how many hips, valleys and dormers break up the roof
  • Dry ridge and verge systems against traditional bedded mortar
  • How much of the existing batten and membrane is being replaced
  • Access and scaffold

Coverage

Where we carry out tiled roofing

Across Berkshire, Surrey and West London, including Reading, Wokingham, Bracknell, Maidenhead, Windsor, Staines-upon-Thames, Feltham, Kingston upon Thames, Richmond, Surbiton, Epsom, Walton-on-Thames, Camberley and Twickenham.

  • Reading
  • Wokingham
  • Bracknell
  • Maidenhead
  • Windsor
  • Staines-upon-Thames
  • Feltham
  • Kingston upon Thames
  • Richmond
  • Surbiton
  • Epsom
  • Walton-on-Thames
  • Camberley
  • Twickenham

Calls answered 7am to 7pm, seven days a week

See every area we cover

FAQs

Things people ask about tiled roofing

What is a dry ridge system?

The ridge tiles are mechanically fixed with clamps and a ventilated roll rather than bedded in mortar. Mortar cracks with movement and frost and eventually lets ridge tiles go, so dry systems are what current practice uses.

Can you match tiles on an old roof?

Often. Some older clay tiles are still made, and reclaimed stock covers a lot of the rest. Send a photo or keep a spare tile and we will tell you what is realistic.

Slate or concrete tile?

Natural slate lasts longer and is lighter, but it costs more and needs the right pitch. Concrete interlocking is quicker to lay and cheaper. Which suits depends on the pitch, the structure and the look of the street.

Free quote

Get Your Quote

Fill out the form below and we will get back to you quickly.

Get a price for tiled roofing

A photo and a postcode is usually enough to get started.

Call nowGet a quote